Your occupants are the best sensors you don’t use

“It’s 21°C, so you must be fine”. Why air temperature sensors do not fully reflect people’s thermal comfort.

Someone says they’re cold. Facilities goes to take a look. A temperature wand gets waved around the desk, and the reading comes back: 21°C. Exactly as expected.

Complaint closed. One person, one space, probably just a cold person. Never mind that the whole team has been saying the same thing for a week.

It happens in buildings everywhere, and it comes from a simple mistake: we treat air temperature as if it were thermal comfort. It isn’t.

Comfort is more than air temperature

People experience temperature through four things at once:

  • Air temperature
  • Radiant temperature
  • Air speed
  • Humidity

Air temperature acts on us through conduction and convection at the surface of our skin and clothes. Radiant temperature is the heat we exchange with surfaces around us, like the heat we lose to a cold window next to our desk.

Air speed and humidity work together through sweat. When sweat evaporates, it takes heat away from the body. Moving air speeds that up. But when humidity is high, the air can’t take much more moisture, so sweat stays put and we feel hot and sticky.

Buildings focus heavily on controlling air temperature, and that’s rational. It works well when the other three are in a reasonable range. But they often aren’t. A big facade of very hot or very cold glass, or a desk placed in the path of a supply air fan, can make someone uncomfortable at a perfectly “correct” 21°C.

So what’s the alternative?

It isn’t measuring wet bulb temperature and air speed everywhere. Anyone who has seen that kit knows it’s not practical for day-to-day building operation.

But there’s a sensor that already measures all four things at once, and it’s in every room: the person sitting there. People can tell you exactly how they feel. That won’t always match the air temperature sensor, and that’s the point. It’s a fuller reflection of thermal comfort than any single reading.

Using people as sensors

We often say “people as thermostats”, which is a rough approximation of what we do. In practice, it’s a form of constant post-occupancy evaluation. People can tell us how they feel at any time, and every response is time-stamped and tied to a location. Over time, that shows us how each space actually behaves thermally.

We use that to adjust the temperature in one space to fix a comfort issue. Sometimes the cause is air speed or radiant temperature. Sometimes it’s the air temperature sensor itself, out of calibration or in the wrong place. Either way, the complaint is a clue, not an anomaly.

Both kinds of sensor, together

At Klimatica, we believe in trusting what people tell us. We use people’s comfort feedback to identify spaces that are too hot or too cold. And then we fix them.

Buildings are already full of sensors: air temperature sensors and humans. We think using both together is how you optimise the thermal environment for the people inside.

 

Posted on 05/11/2026 by Victoria Tink

Share This Story, Choose Your Platform!

Categories:

All News & Insights

Thought Leadership

Awards

Ready to see what Klimatica can do for you?

Give us a ring. Drop us an email. Book a meeting.

Mehul Oswal

Co-founder and CEO

Victoria Tink

Co-founder and CTO

Start a conversation

Subscribe for updates